DEVELON DMS-5 DIAGNOSTIC SOFTWARE - 3.2.9 VERSION [2026.03]

The Doosan Monitoring Program (aka DMS) e-EPOS controller is mounted on the excavator or VCU controller mounted on the wheel loader, and the engine controller provides the following function using the communication between the (ECU) and an IBM.

SOFTWARE FUNCTION

1.You can monitor the current status of equipment installed with the Controller (EPOS or VCU).
2.The major excavator and wheel loader sensor data will be displayed in a graph format. The data can be saved on a hard disk.You can check the excavator or wheel loader's performance through data comparison and analysis.
4.You can check the real-time and past malfunction history maintained by Controller (EPOS or VCU).
5.You can analyze the work patterns when using an excavator and wheel loader, by checking the operation hours, filter/oil information, and daily operation information.

No information available

3.2.9 VERSION [2026.03]

Support Models (Training Machine):

DX:
DX110LCR
DX140LC
DX140LCR
DX140W
DX140WE
DX140ACE
DX150LCY
DX170W
DX180LC
DX190W
DX210W
DX220LC
DX220LCY
DX225LC
DX225LCA
DX225LCY
DX225LL
DX235LCR
DX255LC
DX255LCY
DX300LCA
DX300LC
DX300LCY
DX340LCA
DX340LC
DX340LCY
DX350LC
DX350LCY
DX380LC
DX380LCY
DX420LC
DX410LCA
DX420LCA
DX420LCY
DX480LC
DX480LCA
DX480LCAY
DX700LC

DX-3
DX140W-3
DX170W-3
DX190W-3
DX210W-3
DX110LCR-3
DX140LC-3
DX140LCR-3
DX180LC-3
DX210LCR-3
DX225LC-3
DX225LL-3
DX255LC-3
DX300LC-3
DX340LC-3
DX350LC-3
DX350LC-3
DX380LC-3
DX420LC-3
DX490LC-3
DX700LC-3
DX340LC-3
DX380LC-3
DX420LC-3
DX490LC-3

DX-5
DX140LC-5
DX800LC-5
DX490LC-5
DX420LC-5
DX380LC-5
DX340LC-5
DX300LC-5
DX255LC-5
DX235LCR-5
DX225LC-5
DX230LCR-5
DX210W-5
DX190W-5
DX170W-5
DX140W-5
DX140W MP-5
DX180LC-5
DX140LC-5
DX140LCR-5
DX55LC-5
DX55W-5
DX700LC_MP_MECH
DX490LCA MP MECH
DX420LCA_MP_MECH
DX340LCA_MP_MECH
DX300LCA_MP_MECH
DX225LCA_MP_MECH
DX200LCA_MP_MECH
DX140MWA MP MECH
DX210MWA_MP_MECH
DX260LCA MP MECH
DX225NLCA_MP_MECH
DX210MWA_MP_MECH
DX190MWA_MP_MECH
DX140AF_MP_MECH
DX500LCA-K(YMK)
DX420LCA-K(YMK)
DX340LCA-K(YMK)
DX200LCA-K(YMK)
DX350LC-5

DX-9C
DX88LC-9C
DX120-9C
DX150LC-9C
DX150W-9C
DX215LC-9C
DX220LC-9C
DX210W-9C
DX225LC-9C
DX260LC-9C
DX300LC-9C
DX340LC-9C
DX380LC-9C
DX420LC-90
DX500LC-9C

VCC
DX260LC-9C(VCC)
DX300LC-9C(VCC)
DX360LC-9C(VCC)
DX380LC-9C(VCC)
DX55LC-9C(VCC)
DX60LC-9C(VCC)
DX130LC-9C(VCC)
DX150LC-9C(VCC)
DX150W-9C(VCC)
DX200LC-9C(VCC)
DX210LC-9C(VCC)
DX210W-9C(VCK)
DX230LC-9C(VCC)
DX210-10(VCC)
DX70-10(VCC)
DX70-10(VCC) eco

DX-7
DX300LC-7(VDK)
DX340LC-7(VDK)
DX380LC-7(VDK)
DX500LC-7(VDK)
DX800LC-7(VDK)
DX350LC-7(VDK)
DX1000LC-7(VDK)
DX60LC-7(VDK)
DX50Z-7M(VMC)
DX55R-7M(VMC)
DX50-7(GMEX)
DX17-7E

DL-3
DL200-3
DL250-3
DL300-3
DL300-3 (eMCV)
DL350-3
DL350-3 (eMCV)
DL400-3
DL400-3 (eMCV)
DL450-3
DL450-3 (eMCV)
DL550-3
DL550-3 (eMCV)

DL-5
DL200-5
DL250-5
DL300-5
DL300-5 (EMCV)
DL350-5
DL350-5 (eMCV)
DL420-5
DL420-5 (eMCV)
DL450-5
DL450-5 (eMCV)
DL550-5
DL550-5 (eMCV)
QDK420

DL-7
DL280-7(SDK)
DL420-7(SDK)
DL480-7(SDK)
DL550-7(SDK)

DDK
DDK13

Full Fault code list:
BMS Engine_BOSCH DL0608_NR4
Engine BOSCH DL0608_Stage5
Engine_BOSCH G2_Stage5_NR4
Engine_BOSCH_T3
Engine_BOSCH T3_DL06
Engine_BOSCH_T3_DL08
Engine BOSCH T3_EDC7
Engine BOSCH T4F
Engine BOSCH T4F_DL-5
Engine_BOSCH_T41
Engine BOSCH T4L DL-3
Engine_Cummins_DX
Engine_Cummins T3
Engine_Cummins T4F
Engine_Cummins_T41
Engine_DELPHI T3
Engine_DELPHI T4F
Engine_DL06_DX
Engine_DL08_DX
Engine ISUZU_DX
Engine ISUZU_T3
Engine ISUZU T4F
Engine ISUZU T41
Engine PERKINS_Mid Stage5
Engine PERKINS Stage5
Engine PERKINS_T3
Engine PERKINS_T4F
Engine_SCANIA_Stage5
Engine_SCANIA_T3
Engine_SCANIA_T4F
Engine_SCANIA_T41
Engine_WEIFU
Engine_WOODWARD
Engine YANMAR_T3
Engine YANMAR T4F
Inverter
OBC
Steering DX-7
Steering Stage5
Steering T4F
Steering T41
TCU_Cp
TCU_Cp Stage5
TCU_DZ
TCU_HST Stage5
TCU_HST T4F
TCU_T41
TCU ZF Stage5
TCU_ZF_T4F
Vehicle_B
Vehicle C
Vehicle C07
Vehicle C11
Vehicle_DL
Vehicle DL-3
Vehicle DL-5
Vehicle DL-7
Vehicle DX
Vehicle DX-3
Vehicle DX-5
Vehicle DX-5_Rops
Vehicle DX-7
Vehicle DZ
Vehicle_Solar
Vehicle_VCCS

HARDWARE REQUIREMENT

UVIM DIAGNOSTIC KIT

Doosan Data Monitoring Interface Connection:
A separate communication cable is required to establish communication between Controller (EPOS or VCU) and the external PC.The communication cable should be connected to the excavator and wheel loaders maintenance connector and user PCs serial port.